Single duct vs double duct: why almost every portable in Australia has one hose
319 of 321 portable air conditioners registered in Australia are single duct. Here is what that costs you, and why the energy label gives them zero stars.
A portable air conditioner has to get rid of the heat it removes from the room. It does that by blowing hot air out of a window through a hose. How it gets the air to blow out is the difference between the two designs.
One hose
A single-duct unit uses air from the room to cool its hot side and then pushes that air outside. The room is now short of air, so replacement air is pulled in through gaps under doors and around windows. That air comes from outside or from warmer parts of the house. The unit is cooling the room and warming it slightly at the same time.
The Energy Rating program says the same thing in its guidance for industry: single-duct units are inefficient at cooling a room because they lower the air pressure in it, which draws warmer air in.
Two hoses
A double-duct unit brings outside air in through one hose to cool its hot side and sends it back out through the other. The air in the room stays in the room. In principle that is the better design.
What is actually on sale
Of the 321 portable models registered for sale in Australia since 23 November 2022, 319 are single duct and 2 are double duct. The two double-duct models are both from Zero Breeze, and both are very small: 0.63 kW and 1.54 kW of cooling. There is no full-size double-duct portable in the current register.
The government's own explanation of the 2019 rules describes how this happened. Under the earlier rules, double-duct portables had to meet a minimum efficiency standard and single-duct ones did not. Double-duct units appear not to have met the standard and left the market, while single-duct units multiplied. The 2019 rules put both types under the same minimum, an EER of 2.50.
Why the label shows zero stars
The same rules require every single-duct air conditioner to display a star rating of zero, for all three climate zones on the label. A double-duct unit gets at least half a star. So the stars cannot tell you whether one single-duct model is better than another. To compare them, use:
- the EER (see the most efficient models), and
- the yearly kWh figure on the label (see running costs).
Getting the most from a single-duct unit
You cannot change the design, but you can limit what it costs you.
- Seal the window kit properly. Gaps around the panel let hot air straight back in.
- Keep the hose short and as straight as you can. The hose itself gets hot and radiates into the room.
- Close the door to the room. If replacement air has to come from somewhere, better a hallway than a west-facing lounge.
- Check the box includes a window kit that fits your window. Not every model includes one, and sliding and awning windows need different kits.
Bottom line. In Australia today, choosing a full-size portable air conditioner means choosing a single-duct one. Expect it to cool less than its rated figure suggests, and compare models on EER, not stars.